[Mike Delahunt]

Charlie…I will test that tomorrow morning, thanks for the heads up….Mike

[Mike Delahunt]

I placed hcitpstblconvert (args: {TABLENAME ibm_a2e}) on the outbound tps and it worked like a charm, thanks for all your help!

Mike

[Mike Delahunt]

I want to thank all of you that replied to my dilemma!!  We have a create_ack tcl proc on our inbound tps that requires arguments to define what variant you want to use.  Once I put in the correct variant the errors went away, I knew it had to be something simple.  Thanks again, you guys/gals are the best!

Mike

[Mike Delahunt]

Hello John,

I ran both the variant and the xlate in the tester using the inbound message and both worked with no errors.  I shutdown the site and performed a site clean up, started everything back up and the errors still show up in the process error log.  Any other idea’s?  I can send print screen if that would help.  I must be missing something simple.

Thanks again,

Mike

[Mike Delahunt]

Hello Jim,

You are correct, even though the receiving field is a data type ST I was still able to copy each element to a component of the receiving field and the Xlate automatically inserted the defined component separator.  Thanks for the info!!

Mike

[Mike Delahunt]

Hello Jim,

I would have used the copy command for each but the destination field is set up as data type ST.

Thanks,

Mike

[Mike Delahunt]

Bill,

Thank you it worked perfect! I can’t believe I over looked that!

Thanks again,

Mike

[Mike Delahunt]

Great job with the site! 😀

[Author]

Replies