[Yvonne Gaffney]

We are getting the error trying to pick up the file (GET).

[Yvonne Gaffney]

We did try moving the file using the AIX SFTP commands.

ftp> get CD00212A0UY.ZIP
200 PORT command successful.
150 Opening BINARY mode data connection for CD00212A0UY.ZIP (2495809173 bytes).
CD00212A0UY.ZIP: short write
No space left on device/filesize limit exceeded

 

We cannot even pick up the file 🙁

Guess we need to find some AIX help?  Was hoping someone on here had already dealt with this so I would not have to go so far.

[Yvonne Gaffney]

Maybe I should take the time to explain what we are trying to do, since there could be another solution.

Took a flat file and translated it to hl7, but we did not want all of the records to go to into the database.  I copied the hl7 messages (hcidbdump) to a file which was then given to the user.  They went through the file and removed the messages they did not want to send.  Now they tried using both word and wordpad for this task.  When they save the file and we put it back on the Cloverleaf we are missing the control character; in some cases we lost the CR (word) and in others we lost the NL (wordpad).  Either way, I am trying to figure out how we can do this with some sanity.

Suggestions on how to save this file without loosing the control characters or the best approach at putting them back in is appreciated.  

Thanks ❓

[Yvonne Gaffney]

Attached is the portion of code where I am defining my phone numbers.  Here is the field results –>

|PRI^^^^^^(202)-726-5800^^CO~PRI^^^^^^(202) 829-3753^^CF~^^^^^^””^^CB~^^^^^^(301) 530-9351^^CH~PRI^^^^^^””^^CC|

This is the echo which is the values I am looking for on the next iteration

second phone = (301) 565-0331

outVals = 2ND

[Yvonne Gaffney]

Hi Robert,

Yes there are more than 5 phone number coming in and I am using a .vrl file.  Why must I use an HRL file?  The file is being sent as a comma delimited file and not all of the phone numbers are together.

[Yvonne Gaffney]

Confirmed that the “ACTIVE” was not checked.  Any other suggestions?

[Yvonne Gaffney]

I have tried command line and it was successful.

It says unable to connect to the server.

[Yvonne Gaffney]

We have tried a lot a different things but still have not been able to connect.  Looking for suggestions at what could be preventing connection from the Cloverleaf to a Windows 2008 ftp platform.

Thanks

[Yvonne Gaffney]

the vrl consists of

charge type

pt_name

MRN

FIN

Billing_doc

doc_id

cost_ctr

DOS

CPT_code (could be 1 or more of these)

diag 1

diag 2

diag 3

diag 4

So if I understand I would need a separate vrl to define each CPT code combination I have.  I am not sure I totally understand.  😥

But so that you understand I need to create an hl7 message for each CPT code I could have in the VRL file.

[Yvonne Gaffney]

The vendor we are connecting with has a tcp max segment size of 960.  Is  there a way for us to modify the max segment size on the Cloverleaf?

[Yvonne Gaffney]

To answer your questions….1) Yes when I bounce the interface is does go to an opening session – we have discovered that they must come up first or we will not resolve the connection issue.  2) Our T1 connection is not using VPN but firewalls on both sides.

Here is my result of the trace route I did –>

ci@clovth1:/quovadx/qdx5.6/integrator/cerner_id11/exec/processes/UMC> .34.1  <

trying to get source for 10.65.34.1

source should be 10.80.4.15

traceroute to 10.65.34.1 (10.65.34.1) from 10.80.4.15 (10.80.4.15), 30 hops max

outgoing MTU = 1500

1  10.80.4.3 (10.80.4.3)  1 ms  0 ms  0 ms

2  172.22.2.9 (172.22.2.9)  1 ms  0 ms  0 ms

3  10.32.1.6 (10.32.1.6)  0 ms  0 ms  0 ms

4  10.71.242.62 (10.71.242.62)  3 ms  3 ms  3 ms

5  * * *

6  * * *

7  * * *

8  * * *

9  * * *

10  * * *

11  * * *

12  * * *

13  * * *

14  * * *

15  * * *

16  * *

[Yvonne Gaffney]

Understood and Thanks Charlie.

Let me ask another question.  If I am processing a raw feed from one system to another – is the packaging  being done by the sending system or the Cloverleaf?

[Yvonne Gaffney]

Great response gentlemen!

It was actually much easier than I expected 😀 !!  I also liked the idea that a level 1 person would understand what I did.

Thanks so much for your help!!

[Yvonne Gaffney]

So I cannot get the Cloverleaf to send more than one message at a time?

[Yvonne Gaffney]

Just to make sure we are talking the same thing. Are you talking about the directory on the “Fileset Options” tab or on the “FTP Options” tab?  I do specify an Outbound directory on the FTP options tab.

[Author]

Replies