X12 help

[Travis Tuinstra]

I am trying set up a connection for 270/271 transactions. In the EO Config: I have enable_all and in the log it shows

IDLE and 572 bytes but no error: starting READ

PDL changed states: old 0, new 1

Calling Tcl procedure: hci_pd.read

with args: {}

Tcl procedure hci_pd.read returns ‘RECEIVE’

trying to match phrase: basic-msg

] multi: phrase #0 rejected; trying next

11/23/2009 14:04:19

no-match: no more phrases to try

I assume there is something set up wrong, but am at a loss as to what. This is our first X12 transaction set. Can someone give me a few pointers as to what to look for?

Topic

[Jim Kosloskey]

What protocol is the sending system using?

If you set this up like HL/7 and used mlp-pdl, then I think that is your problem.

When I have done real-time X12 it is usually TCP/IP. The X12 community does not have the mlp specification.

What does your Companion Guide from the sending system indicate?

In the log take a look at the hex dump of the message (it appears you are using a PDL protocol) I suspect it does not have whatever encapsulation you are expecting.

email: jim.kosloskey@jim-kosloskey.com 29+ years Cloverleaf, 59 years IT - old fart.

[Author]

Replies