Clovertech

processes stop/start very slowly

› Clovertech Forums › Read Only Archives › Cloverleaf › Cloverleaf › processes stop/start very slowly

  • Creator
    Topic
  • April 8, 2011 at 5:02 pm #52396
    Jeff Dinsmore
    Participant

      Over the last month or so, the performance of starting/stopping processes on Cloverleaf (5.6 – Linux on VMWare) has slowed way down.

      It’s the same on both my LIVE and TEST servers.

      It used to stop/start processes pretty quickly, but now it may take a couple minutes.

      Are there any processes that should be bounced periodically?

      Any other suggestions?

      Thanks,

      Jeff.

      Jeff Dinsmore
      Chesapeake Regional Healthcare

    • Creator
      Topic
    Viewing 1 reply thread
    • Author
      Replies
      • April 8, 2011 at 5:40 pm #74048
        Jim Kosloskey
        Participant

          Jeff,

          Check your Recovery and Error DBs.

          If there are a large number of messages in either or both that will slow down the startup.

          Also if you have overloaded the processes with threads that can contribute to slowdown.

          There may be other factors as well.

          email: jim.kosloskey@jim-kosloskey.com 30+ years Cloverleaf, 61 years IT – old fart.

        • April 8, 2011 at 7:34 pm #74049
          James Cobane
          Participant

            Also make sure that you are cycling your Saved Message (SMAT) files periodically (we do it nightly).  You may want to look at your hcimonitord.log and insure that it is not overly large as well.

            Jim Cobane

            Henry Ford Health

        • Author
          Replies
        Viewing 1 reply thread
        • The forum ‘Cloverleaf’ is closed to new topics and replies.