Connectivity to outbound thread

This topic has 3 replies, 2 voices, and was last updated 16 years, 7 months ago by Jim Kosloskey.

Creator

Topic
February 15, 2008 at 9:31 pm #49831

Huy Tran
Participant

HPUX 11.11; CL 5.3

I have an outbound thread that is working most of the time.

But from time to time it goes to
Creator

Topic

Viewing 2 reply threads

Author

Replies
- February 15, 2008 at 9:56 pm #63772
  
  Jim Kosloskey
  Participant
  
  Huy,
  
  What does the process log say? I’ll bet you will see something like ‘remote side shut down’.
  
  Jim Kosloskey
  
  email: jim.kosloskey@jim-kosloskey.com 29+ years Cloverleaf, 59 years IT - old fart.
- February 15, 2008 at 10:27 pm #63773
  
  Huy Tran
  Participant
  
  Jim,
  
  The process log shows
- February 16, 2008 at 12:14 am #63774
  
  Jim Kosloskey
  Participant
  
  Huy,
  
  There is not much you can do here. Cloverleaf(R) has sent a connection request (SYN_SENT) and has timed out waiting for the other side to respond with something (ACK_SYN or RST perhaps).
  
  I suspect Cloverleaf(R) then waits the Auto_retry delay you have set and tries to connect again. Apparently one of the times it succeeds.
  
  It is either on the receiving system side or there is a firewall or some such thing somewhere blocking communication for a period of time.
  
  My bet is the vendor needs to pull his head out.
  
  Right back at ya on the weekend thing.
  
  Jim Kosloskey
  
  email: jim.kosloskey@jim-kosloskey.com 29+ years Cloverleaf, 59 years IT - old fart.
Author

Replies

Viewing 2 reply threads

The forum ‘Cloverleaf’ is closed to new topics and replies.