Basic Security install and Network Monitor problems

[Rich Allison]

We recently installed Basic Security on our test server and immediately started having display problems with our Network Monitors.

Topic

[Terry Hagen]

This was our solution:

Symptom:  Threads or processes don’t reflect actual status (up/dead) in gui

Fix:  run hciserveradmin

under Hostserver tab go to Advanced tab

click on

[Rich Allison]

Terry,

Thanks for the response.  I made the changes to the Buffer size and JVM arguments.  The Host Server wouldn’t restart with the JVM arguments specified.  I removed them and left the Buffer size at 320 and I still have the problem with the monitors.

[Michael Hertel]

Rich,

I’m not sure if you’ve resolved this or not, but see the previous post:

http://clovertech.infor.com/viewtopic.php?t=274

Terry’s args had a space in them.

Also, make sure hostserver routes traffic is not checked on.

Rick Brown also gives instructions for editing server.ini directly.

Good luck,

-mh

[Rich Allison]

Michael,

Thanks!  Looks like it solved the problem.

Appreciate the help, Rich Allison

[Author]

Replies