As you have mentioned above that 300 sites running without issues. I believe that server configuration to handle these many sites will be having high configurations with respect to RAM memory and disk size.

Just out of curiosity, how many processes you were having in each site or total number of processes for 300…Read more

What is process split and site split and how can we achieve in Cloverleaf 6.2?

Any specific use case scenario, where we can use process split and site split.

Thanks & Regards,

Varun

As per Infor, is there any standard or best practice which tells as

How many sites a single Cloverleaf server instance can have?

How many processes could we create within a single site?

How many threads should be there in a single process? ( I believe that max 10 to 15 threads within a single process is the best practice)

Thanks &…Read more

Regards,

Varun

Now, the portable client is unable to access the CIS services and unable to connect to host server. Let me know if there are any specific port configuration missing on our side.

Host server installed on Windows 2012

portable client is being executed from Windows 10 Pro

Thanks & Regards,

Varun

We have host server (6.2.0) installed on Windows Server 2012. We are using portable client at desktop.

As per install guide, port on host server to open was 13022 for 6.2 version.

We were still unable to access the host server using portable client installed on our windows desktop. Later our network team added the port numbers: 60429,…Read more

We figured out that Cloverleaf service was not running and as soon as it came up, we were able to start the Monitor Daemon.

Thanks Everyone for your valuable input.

Regards,

Varun

I am unable to start Monitor Daemon of HelloWorld site.

Server Windows Server 2012 64 bit

Following error while killing Daemon

************************************

Command Issued: hcisitectl -k m
Command status: 0
[0:TEST] msiShmemAttach: Can’t create shmem file ‘C:cloverleafcis6.2integratorhelloworld/exec/monitorShmemFile’: No such…Read more

Finally, I was able to log into the landing page.

If James Danley can comment, it would be great as he had trained me back in 2017 on Basics. It seems that he is the trainer for Advanced as well.

Though, Advanced also seems to be 5 full days training session and it’s showing 1250 USD. Is 1250 USD per session or for entire 5 Days…Read more

I have lost the Infor link to get details around Cloverleaf Certification. Can someone please help me to get that link? I have to also download my Level 1 and Level 2 certification which I have done it back in 2017. Is there any way to get that as well?

Thanks & Regards,

Varun Sinha

I have sent you an email. Please send me the proc, so that I can start off with.

Regards,

Varun

https://usspvlclovertch2.infor.com/forums/topic/capture-single-message-metadata/

e.g. *.idx file contain offset of where each message starts and its length (as well as all…Read more

Once again, appreciate your help and guidance.

Regards,

Varun

I am not very good at tcl script. Can you please share the tcl script, so that even I can test some regex.

Regards,

Varun

I guess, I overlooked the GUI menu of Cloverleaf 6.1.

I learnt on the way as if I need to select any message, I need to click on Toggle Selection button.  It’s the first time, I ever used SMAT files. This seems to be somewhat different from a resend on SMATDB file. Now, I got it.

Thanks & Regards,

Varun

How can I save few messages, like only, 1 or 2 or 3 messages  from *.idx, *.msg & *.ecd under SMATHistory folder to a file location which I can use for testing purpose?

Regards,

Varun

I am using Cloverleaf 6.1 on Windows server.

I want to test xlt file using testing tool and it asks for choosing data file.

I have received *.idx, *.msg & *.ecd under SMATHistory folder of inbound thread. Since, the *.idx/*.msg contains 1000 of HL7 messages, I want to retrieve/create one sample message through the *.idx/*.msg.

Is it p…Read more

The above regex worked beautifully with desired result all the time. Thanks for your effort by looking into this issue.

Please let me know any best regex tutorial to crack these kind of scenarios within cloverleaf. How can we judge these regex against any cloverleaf versions for SMAT files and for SMATDB too?

Thanks &…Read more

But, I am getting following error while executing the below regex via SMAT-View- Add Specified Messages To View- Add A Regular Expression Condition

{rPID|.*?|.*?|.*?|.*?|s+|}

{rPID|.*?|.*?|.*?|.*?|s+|}

Error: The regular expression you typed is not valid.

Thanks & Regards,

Varun

Since, it’s production environment data, I don’t have luxury to dump it at a location. I can just search using SMAT-View.

Using regular expression under SMAT-View: I want to search for messages having PID-14 not blank?

The following regex under SMAT-View doesn’t work

rPID(?:[^|]*|){5}(|)

Regards,

Varun

I have successfully searched if hl7 messages contain email addresses (as *.com) in SMAT files via SMAT-View- Add Specified Messages To View- Add A Regular Expression Condition with this very simple regular expression (?s).*.com.

As I see the documentation for Cloverleaf 6.1, it shows only content search.
Can we search based on HL7 field…Read more

I am also curious to know:

Do we have old ways (I mean old site or old forum) to view clovertech community questions & their responses?

It seems very difficult to search and view old questions. Please let me know if it’s possible.

Thanks & Regards,

Varun

I am getting the following error while installing Cloverleaf client updates on CIS 6.1.1.0 on Windows 10 Pro.

While checking windows version, it gives me an error that CIS 6.1.1.0 is not applicable to this version of Windows.

Is Windows 10 Pro not a supported version for CIS 6.1.1.0?

Thanks & Regards,

Varun

I ran the following command in backend (linux)
sqlite tcpresults_data.20180920234713.smatdb ‘select count(1) from smat_msgs’  
and got the following error
Error: file is encrypted or is not a database

I have even gone through the following topic, but I am unable to decrypt the smatdb file (Apology as I am new to sqlite)

Access…Read more

Even my settings did work. Though, I was interpreting it wrongly and thought that it didn’t work. But it worked as expected.

It worked like
Executing the job every first second of only the 10th minute of 4 to 7 am on all days of all weeks.

And you are right that for every 5 minutes run, we can use */05
OR
something like…Read more

code to write it out to a data file

Code to read the csv files and write to SQLite DB

but I do not see the TCL proc that reads the DB and puts out a daily report.

Can you please share the TCL proc that reads the DB and puts out a daily report?

I am new to cloverleaf TCL.…Read more

I am using  “Append to File” in the OB thread File Protocol properties.

I faced issue when I tried to save inbound thread production messages from smatDB through Resend Message to a file. It definitely allows you to save multiple messages at one go.

Steve! Please let me know if my approach is correct or not for testing…Read more

Issue was resolved as you mentioned above.

We issued the command to kill the 6.2 process by kill -9 and then issued hciss -s h and it started the host server environment.

Currently, Cloverleaf 6.1 & 6.2 are running parallel. There was no issue found except for one thing:
Cloverleaf 6.2 host server…Read more

Even, I think that full automation is waste of time and we need manual intervention if we find any difference.

I found it little difficult to stage production data based on MSH-10 through smatDB as output file just gets overwritten instead of appending. Currently, I am trying to test the interfaces based on…Read more

Since, Cloverleaf 6.1 and 6.2 were running on the same box, somehow hci2 user process (for version 6.2) was trying to open the test site of Cloverleaf 6.1. We need to kill this process in order to make test sites up for Cloverleaf 6.1 as well as 6.2 on same Linux box.
          I have no idea as how this might have…Read more

Also, We have installed 6.2 on the same box. But it was running fine for 6.1. We haven’t made any process up in 6.2.

Resending through file allowed me to send entire messages in one go.

Thanks for your help once again.

Regards,
 Varun

As you mentioned that “With regards to resending from Network Monitor/NetMonitor, you simply right-click on the thread, then Control > Full > Resend ”  

Is this the new thread which I need to create? Will it be a file thread or tcp thread or any other? I am new to cloverleaf, so apology for any stupid questions.

Currently, this…Read more

@James:
Workaround
Do not use the Mark All Messages button if it is a time query. Instead, click the check box column