[Shelbi Engle]

Thanks, will check that out!

[Shelbi Engle]

I changed it to last received instead of the latency, and for some reason I can’t get it to fire after the first round of alerts that go out (in this example, it is 2 repeating).  Not sure why it doesn’t trigger.

[aler:aler:WARN/0:_hcimonitord_:03/27/2018 15:51:58] Completed Cascade Actions

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 15:54:01] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 15:54:01] Doing ‘statusrpt’ command with args ‘his_adt_input’

[aler:aler:WARN/0:_hcimonitord_:03/27/2018 15:55:03] Calling doActions(13, alert {{action notify} {name {default.ADT TEST}} {type lastr} {source his_adt_input} {value {{his_adt_input 66}}} {repeatcnt 0} {message {Thread last inbound message received time of his_adt_input has been more than 1 for 60 seconds, currently {his_adt_input 66} — where’s my ADT}} {gendate 1522184103} {host IWC-CPN681-2} {root D:/gehc-it/ccg/quovadx/cis6.0/integrator} {site qs_prod}})

[aler:aler:WARN/0:_hcimonitord_:03/27/2018 15:55:03] Completed Cascade Actions

[aler:aler:WARN/0:_hcimonitord_:03/27/2018 15:56:03] Calling doActions(13, alert {{action notify} {name {default.ADT TEST}} {type lastr} {source his_adt_input} {value {{his_adt_input 126}}} {repeatcnt 1} {message {Thread last inbound message received time of his_adt_input has been more than 1 for 120 seconds, currently {his_adt_input 126} — where’s my ADT}} {gendate 1522184163} {host IWC-CPN681-2} {root D:/gehc-it/ccg/quovadx/cis6.0/integrator} {site qs_prod}})

[aler:aler:WARN/0:_hcimonitord_:03/27/2018 15:56:03] Completed Cascade Actions

[aler:aler:WARN/0:_hcimonitord_:03/27/2018 15:57:03] Calling doActions(13, alert {{action notify} {name {default.ADT TEST}} {type lastr} {source his_adt_input} {value {{his_adt_input 186}}} {repeatcnt 2} {message {Thread last inbound message received time of his_adt_input has been more than 1 for 180 seconds, currently {his_adt_input 186} — where’s my ADT}} {gendate 1522184223} {host IWC-CPN681-2} {root D:/gehc-it/ccg/quovadx/cis6.0/integrator} {site qs_prod}})

[aler:aler:WARN/0:_hcimonitord_:03/27/2018 15:57:03] Completed Cascade Actions

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 15:57:18] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 15:57:18] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 15:58:25] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 15:58:25] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 15:59:44] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 15:59:44] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:02:28] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:02:28] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:02:54] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:02:54] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:05:04] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:05:04] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:06:44] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:06:44] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:07:00] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:07:00] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:15:58] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:15:58] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:34:59] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:34:59] Doing ‘statusrpt’ command with args ‘his_adt_input’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:35:27] Received command: ‘statusrpt qs_xml_output’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:35:27] Doing ‘statusrpt’ command with args ‘qs_xml_output’

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:35:32] Received command: ‘statusrpt his_adt_input’ on connection 0x1f39f60

[cmd :cmd :INFO/0:_hcimonitord_:03/27/2018 16:35:32] Doing ‘statusrpt’ command with args ‘his_adt_input’

[Shelbi Engle]

Thanks, that’s what I figured and ran the clean up script to resolve.

Just wondered what that message specifically means.

[Shelbi Engle]

Thanks Jim!

I’ll see which route the client would like to take.

[Shelbi Engle]

Thanks, I’ll take a look and see if this works.

[Shelbi Engle]

Following the instructions in the link for the new mime file resolved my issue.

https://usspvlclovertch2.infor.com/viewtopic.php?t=4901

Thanks!!!

[Shelbi Engle]

Thanks, that worked!!

Waiting to put in Rev2 after it is certified with our product.

[Shelbi Engle]

This is how I finally got it to work:

*Iterate through PR1 group (using a pathcopy)

*IF statement:

Used “eq” for my two field qualifications

@null for all the fields in that segment so the entire segment would not contain any information, thus would not be passed

Thanks for the help!

[Shelbi Engle]

For clarification – I’m not using Bulk Copy.

I tried using this logic and it wasn’t successful:

*Group Iterate on PR1

*IF Statement using “ne” on my two fields

1(0).0(%g1).PR1(0).#2(0).[0]  ne =I9  &&  1(0).0(%g1).PR1(0).#5(0).[0]  ne @null

*Pathcopy PR1 group to PR1 group

1(0).0(%g1).PR1(0) –> 1(0).0(%g1).PR1(0)

Also tried the other way around, using “eq” on my two fields and @null on my pathcopy.  Didn’t work.

I must be missing something….

[Shelbi Engle]

Joe,

This sounds like the same or similar issue I am having.  Did you ever find a solution?

Thanks!

Shelbi Engle

[Shelbi Engle]

Thanks so much!

That would explain it.

[Author]

Replies