I run it upon receipt of FTP file(s) and then again just before delivery of FTP file(s).


#!/usr/bin/ksh

# Begin Module Header ==============================================================================
#
#------
#…Read more

Since you said the site is down, does that mean the monitor deamon is down, too?

If the monitor daemon is not down then I don’t consider that site to be down and the alerts could be active.

If the monitor daemon looks to be down, the alert causing the auto start could be running…Read more

There is also hcihl7convert an hcihl7convert for variants if the variant is the problem after upgrade.

I did a NFS mount read only of the physical location of /cloverleaf/qdx5.6 directory onto my cloverleaf 6.0 server and used a symbolic link to make it look like they existed in the right place on my new cloverleaf 6.0 server.

Then I was able to trick it into…Read more

I’ve always used hcirootcopy to upgrade a site from one cloverleaf version to another.

I can’t say if one is better than the other but hcirootcopy has done the job for me in case you haven’t tried it.

Here is a relevant code snipett of interest to illustrate, which…Read more

Code:

#!/usr/bin/ksh
#
# Begin Module Header ==============================================================================
#
#------
# Name:
#------
#
# stop_all_procs.ksh
#
#---------
# Purpose:
#---------
#
# stop all running…Read more

Also if you didn’t already know this, recovery DB turned on typically only makes sense for receiving interfaces and not for sending interfaces.

Turn off…Read more

So if these are the moduels of interest like mentioned…Read more

I’m talking about

‘KILL ‘ (returned by ‘cl_check_ack ‘) does not match { }

even when the reply handling is properly configured.

The most common cause of this has been an extra…Read more

We saw inexplicable slowdown and bottle necks when upgrading from cloverleaf 5.6 to cloverleaf 6.0 on the same hardware and AIX 6.1 OS.

We did several things that ended up being band aids but did help.

One significant speed improvement was upgrading the OS from AIX 6.1 to AIX 7.1 in place, which…Read more

Jim also spoke about the from and our AT&T to Black Berry was filtering because out Cloverleaf box was hci@mdanderson.edu which is an unknown domain to the world and deemed an…Read more

Here are a couple of HTTP related URLs that talk a little about certificates even thought it is something I haven’t done myself.

<a href="https://usspvlclovertch2.infor.com/viewtopic.php?t=5539“…Read more

We had upgraded in place from AIX 6.1 something.

Interfaces configured to use ports in the ephemeral range is just a matter of time before they malfunction and can even impact the cloverleaf host server and hang that too.

Definitely make sure none of the ports are in the ephemeral range.

The ephemeral…Read more

The last time I had similar circumstances I used TCP/IP trace to determine there was an unintended server connecting in addition to the live server.

My analysis eventually revealed the disaster recovery interfaces on some of the servers had been turned on unknowingly.

Once those DR…Read more

I posted to illustrate the preprocessing and removal of files I do before using a cloned site.

Our architecture will different than yours so the script will not likely run as is at your enterprise, but it illustrates…Read more

Even though its called tar_site_to_move.ksh it isn’t required to move the site to another box and can also be used to clone the site on the existing box.

I have used it to created cloned versions of an existing site whne making extensive and time consuming modifications to a site so the running…Read more

I have a couple of more elaborate scripts…Read more

<a href="https://usspvlclovertch2.infor.com/viewtopic.php?t=1663“…Read more

Local Binding Address

is set to anything for either of them.

The thought that comes to mind right off the bat is to be sure if you ever do a hcidbdump command let it finish no matter how long it takes and never break out of it by doing ctrl-c or you will create problems with accessing the DB.

Instead of upgrading in place, if possible lay down a new UNIX server with a scratch install to the highest OS version that your new cloverleaf will run on.

Next install the more recent version of…Read more

This is the first conversation I’ve heard asking about max number of CPUs being a possible restriction.

I was under the impression that a minimum of 2 CPUs is required to even be supported by the vendor.

Plus virtual CPU versus physical CPU gets to be fun at…Read more

Here is something I just learned to consider when deciding to use JAVA instead of TCL that might sneak up on you down the road.

Incident : 9358108  Summary:
Cloverleaf 6.0.0 on AIX 7.1 TL4 SP1 (system security patch to JAVA 5 needed, but want to make sure this will not adversely impact Cloverleaf)…Read more

<a href="https://usspvlclovertch2.infor.com/viewtopic.php?t=1367” class=”bbcode_url”>https://usspvlclovertch2.infor.com/viewtopic.php?t=1367

will also show what is stored in the USERDATA metadata.

I used that technique when developing a script to write stuff to the USERDATA metadata.

I will wee if I can locate my older post illustrating that script in case it is something you can leverage.

hcidbdump -r -L

and you will be able to see what is stored in USERDATA metadata.

Now…Read more

I was looking for a very old proc I thought I wrote to squeeze/caoncat multiple fields into a trimmed down version but it took me a while to realize I started it but never finished.

|64587- – |

makes me suspicious your HL7 path definition for TXA-10.1 and TXA-10.1 might be off or nothing exists in those locations.

Try running 3 separate tests of a straight copy for each item you want to eventually concat to make certain you get that working first before trying to concat them.

    <a href="https://usspvlclovertch2.infor.com/viewtopic.php?t=1562&highlight=tbllookup” class=”bbcode_url”>https://usspvlclovertch2.infor.com/viewtopic.php?t=1562&highlight=tbllookup

that uses a trxID proc to kill messages that illustrates what James Cobane described by using the tbllookup command.

I…Read more

We ended up getting the vendor a Win7 virtual machine in-house that the contractor could remote desktop to, so did not use it on WIN10 more than a couple of days.

Even when I do rarely use SMAT in the GUI it is just for viewing.

I don’t trust the SMAT GUI under cloverleaf 6.0 to ever do a resend or write to a file.

Yes I consider backend access to SMAT messages useful and is my preference as opposed to the SMAT GUI tool most of the time.

I haven’t launched the SMAT GUI tool hardly at all over the last decade.

For other people they can’t live…Read more

   ebcdic_smat_to_nl.ksh
   len10_to_nl.pl
   ascii_smat_to_nl.ksh

that I previously posted at the following URL

<a href="https://usspvlclovertch2.infor.com/viewtopic.php?t=1539&amp;”…Read more

netconfig -> select outbound thread -> uncheck use recovery database

netconfig -> select outbound thread -> inbound tab -> check outbound only

I thought you were just trying to get something working for the new environment and leave the old environment alone.

Try the more granular solution that Jeff posted previously, which I think has a good chance working on both the…Read more

If you can determine what the source interface is, let us know if the source interface of the message in the error DB is an outbound interface.

If that is the case, probably something with replies being treated as data with no route defined.

A reply with an extra new-line character…Read more

If this helps changing it to %r gives lower case am/pm for my test seen below:

Of course another test in the afternoon would need to be done to be certain, but I will leave…Read more

Regardless of what approach is used this consideration might manifest itself and will need a solution for that case.

One thought I had for that is the whatever_R01.ready and…Read more

If I only look for the…Read more

some people and some of our scripts also use this

the outcome seems to be successful either way.

One of our team members had horrible IDE slowness after upgrading from cloverleaf 5.6 to 6.0 that he just couldn’t make go away.

Everyone else had no issues even on the same exact setup.

He even uninstalled/reinstalled cloverleaf…Read more

For interfaces that were EBCIDIC we set the ib thread to binary and any thread it routes to is set to binary, anything after that could be ASCII.

For example we have inbound sites, distribution sites, and outbound sites so for one…Read more