Its been approx.  20 years for me with Cloverleaf although we have been switching to Rhapsody ( I know , boooo .. LOL ) last couple of years. I still monitor the forum because, good to remain in contact with a great group of Integration people and who knows, may be back.

Anyway , Best of lu…Read more

Happy 2021

I concur with the responses so far. The older forum was much easier to navigate and find specific  answers to your needs. It was ” easier to use and more inviting, and just easier to browse through. ”

Our site is very far behind on the Cloverleaf version so answers are not relevant anymore and refer back to  my fir…Read more

Thanks for your insight. Our situation is tricky in that our GOLive is not until this Saturday. We are converted all of our Interfaces with addition of some new ones but we are not starting all of them at the same time. Messages will need to be queued somewhere.  It will take some clever logistics no matter how we look at it.

Let it…Read more

That is correct and that is our hope, for Meditech to hold the messages as I have more concerns with them being held in the Engine.

Keith ,

Yes, we were also hoping to throttle / regulate the messages from Meditech?
As I mentioned to Jim , having concerns of the number of messages held in the Engine.

With the Inbound on Hold we would be able to queue the messages in the
Meditech (source) system therefore not holding ALL the messages in the Engine. We are expecting several thousand messages to be queued in Meditech which will be routed through the engine.

Hope that makes sense, Jim

Thanks

I just tried on the Outbound thread and it works.

I thought for sure I was able to use the “Start with Hold” on the Inbound thread before.  😕

Can anyone at Infor confirm if this functionality should be working on any thread, Inbound or Outbound.

Greatly appreciated

Thank you again . That help. I noticed we were using an old hl7Raw_ack proc which was missing logic to handle MultiServer.  Got a new one from Clovertech TCL library and seems to be working.   🙂

I tried the Multiserver Option but not quite getting it yet. I understand I may require a specific TCL proc to handle the the ACKs and replies.
It would be on the Outbound Thread – Outbound Tab – TPS Inbound Reply.  

From other responses in Clovertech there many bit and pieces of suggested code but I am not successful yet pulling it…Read more

Jerry ,  We are moving to MT 6.16 .  What method did you use to reset your connections every hour ? Cron job or if you are on Windows, a task ? Did you do both IB and OB?

Thank you for your help on several occasions.

It is great you are hanging around Clovertech to continue sharing
with us your weath of knowledge and expertise.

Yes , it does make sense . I will give it a try .
Much appreciated.

Thank you .

Thank you.  We are using file based SMAT files so I can look at the .IDX files. Any idea on how to match the metadata of a single message from the .MSG file to the .IDX file.  ?

I believe I do the same as you Robert having a Wild Card route as ADT_A((0[1-8])|11|12|13|34) using the XLT X_Star_Nuance_ADT.xlt
and I created an HL7 variant with a message just called ‘ADT’ .

Quote:
As long as you do a BULKCOPY first or at least make sure you copy MSH.9 -> MSH.9 and EVN.1 -> EVN.1 everything will come out fine.

You *MUST* make a variant that matches for all types.  Iusually take an ADT_A01 variant and make any segments not used by all messages optional.  Then simply copy this message variant to all others; A03, A04,…Read more

As much as we would like to upgrade soon we are now committed to using the ODBC Connect drivers. Unfortunately, looks like it may be next year before we upgrade.  🙁

Thank you .

Another recent Clovertech thread discussed SQLite with CL version 6.0 .

I believe it was 5.7 and above when SQLite was bundled with Cloverleaf.

In your sample SQL scripts used with Cloverleaf is it independent of the CL version.  

Thanks

I too have run into this issue a couple of times. Once with a large amount of OBX segments in the message and just recently with a CSV file with over 6000 records.

I was able to successfully Test both scenarios with the ENCODING option set to Blank .

We experienced a similar issue recently when we upgraded to 5.8.
When we tried to FTP to a server is was trying to use EPSV ( Extended Passive mode)

I did several Google searches before I determined we could use a cURL command option to turn off the EPSV.

The cURL options can be set in Thread Configuration – Protocol FTP…Read more

For the iteration variable the letter is designated for the type of iteration. It can be either f (field), g (group), l (list), or s (segment).

We had this problem recently with our Test server. We recently upgraded to 5.8 running Linux (have not changed my signature yet) .  In order to correct your error you will need to increase the size of the semaphores in the Kernel. This does not require a reboot.

To do this use this command to change the kernal values.
               …Read more

And David B. Very good point on the “msgget” with the large files. Definitely keep this in mind.

We are investigating the handle of ” base-64 encoded ” pdf files.
You mentioned in this old thread you do not have any issues with passing messages over 100K in size.

Do you know what is your average and maximum message size for the  based-64 encoded files/messages you have encountered.  ?

Are you aware if there is any lag time in…Read more

I understand the logic now with setting DRIVERCTL .

I have modifed our HL7 ACK tcl to include with the DRIVERCTL statement . It probably is working but after further investigation I believe we are experiencing a somewhat different issue.  I am examining it further.

Thanks for your help.

I have changed the line as you mentioned but I am not sure how to set the
DRIVERCTL information.  Do you have an example ?

Thanks again.

We are experiencing, I believe the same issue as Jared , and would like to try your solution .
I am not a expert in TCL . I have added your line in my code ( below) . Can you confirm I have the correct location. ?  Hopefully I have included enough of the code .

#
# Now build the ACKNOWLEGEMENT message
#
   set ACK…Read more

Season Greetings to All.
Best Wishes in 2010

I think what you did was similar to what Jim was describing , setting the default at the beginning of the proc.

Thanks very much to both.

Makes sense but do I need another CONTINUE or is my CONTINUE in the wrong section
of the code. ?

I have tried it and it works great. Thank you

Jim ,

You have given me a lot of food for thought about going forward with this method.
We are on 5.4 but I recall at last years conference someone talking about the master site and global tcls, formats  etc… . These are good ideas and there are many things to consider.

We…Read more

We are about to try this as well. You mentioned ” . . .manage separate inbound and outbound connections on the same port

Did you use the same port from one site to the other.
ie Site A  – Outbound Thread AA  Port 9991 to
   Site B  – Inbound  Thread  BB   Port 9991 .

Is this correct. ?
Also,  was there any ACK/NACK  performed…Read more

Well done !!

I’ll have to come down someday for a site visit, to get a first hand look.

Just found my answer. Thanks anyways.

Apparently I was not copying the subfield in the XLT itself.  Duh!!

We are on vers 3.8.1P but you can try using the ‘ mktclindex ‘ utility
to rebuild the tclIndex from the tcl procs within the Tclproc directory .

Paul