Clovertech

Judy Johnson

Forum Replies Created

Viewing 10 replies – 1 through 10 (of 10 total)
  • Author
    Replies
  • March 3, 2014 at 10:54 pm in reply to: NETSTAT does not return ESTABLISHED even though it is … #80086
    Judy Johnson
    Participant

      Max. I checked all the sites all the service files and even changed the port 3 times……no one else is using

      March 3, 2014 at 5:00 pm in reply to: NETSTAT does not return ESTABLISHED even though it is … #80084
      Judy Johnson
      Participant

        thanks Jim…i will look into that…..

        March 3, 2014 at 4:19 pm in reply to: NETSTAT does not return ESTABLISHED even though it is … #80082
        Judy Johnson
        Participant

          also, Jim…these are Intersite connections..only on our networkwork…

          March 3, 2014 at 4:13 pm in reply to: NETSTAT does not return ESTABLISHED even though it is … #80081
          Judy Johnson
          Participant

            The port we were using 20136….that would not netstat…then changed to even a lower number, no luck……now we are using 72127….no luck again.

            this is strange. our network people dont know either.

            June 13, 2011 at 5:55 pm in reply to: 5.8 rev3 using AIX 6.1 #74405
            Judy Johnson
            Participant

              attn: Alan Fleming

              We did not notice on our TEST box either….on your test box after you run all you compress scripts, use the following command and see if you are left with I-node file

              **note: i dont have any on my test box…just production** I dont have the volumn. Even with the compress gone from our scripts, we are still getting new inodes…

              set you default to /healthvision (or whatever you call your directory)

              fuser -dV /healthvision

              CLOVERLEAFP as hci # > fuser -dV /healthvisionp

              /healthvisionp:

              fd=24 7602380

              fd=21 7864456

              fd=24 17629320

              fd=21 19988508

              fd=29 34341042

              fd=21 38404236

              fd=24 40632532

              fd=21 41156640

              fd=24 49938530

              fd=22 55574548

              fd=24 57475274

              fd=33 59572252

              ***above all all the inodes created, i must stop and restart all the processes to clear up***

              June 8, 2011 at 2:41 pm in reply to: 5.8 rev3 using AIX 6.1 #74401
              Judy Johnson
              Participant

                5.8.3 is cloverleaf version…..

                Unix version is 6.1.0.0. 5…on a P7 box

                June 8, 2011 at 2:39 pm in reply to: 5.8 rev3 using AIX 6.1 #74400
                Judy Johnson
                Participant

                  yes…we are on 5.8.3 and are still having issues….again, R&D is looking at code and we have weekly calls between them and IBM and ourselves. Will let you know what happens…hopefully soon…

                  May 23, 2011 at 9:52 pm in reply to: 5.8 rev3 using AIX 6.1 #74398
                  Judy Johnson
                  Participant

                    Thanks for the link…but in looking at the memory leak and smat file issues, it was suppose to be fixed in REV3… we are on REV3, unix os 6.1.0.0.5 and still experiencing this….we have ticket open with lawson and are awaiting response from R&D.

                    judy

                    May 17, 2011 at 11:10 am in reply to: 5.8 rev3 using AIX 6.1 #74395
                    Judy Johnson
                    Participant

                      well we are on 5.8 Rev 3 unix os level 6100.05. When our nightly backup runs, all I/O is used and messages backup for 45 minutes….also when we run our cycle scripts, any scripts using a compress command, freezes the system, records backup in the engine and not delivered until scripts are done.  Had IBM look at , and there seems to be something with file locks. Because of this, we had to comment out all compress and our backups are selective, until this is resolved.  You will see, after you run your compress, i-nodes still created and space not freed up until process is cycled.

                      October 11, 2010 at 10:24 pm in reply to: HL7 version 2.6 #72836
                      Judy Johnson
                      Participant

                        Jim

                        as you know, even the groupings were changed on the 2.4 varient from

                        5.5 to 5.8.  Rework there also.

                        jj

                      • Author
                        Replies
                      Viewing 10 replies – 1 through 10 (of 10 total)