I am splitting a message with repeating FT1 groups into individual messages. Within the iterate on the FT1 basis, I have an iterate on a FT1.19. FT1.19 is empty, most of the time. However, once it is populated, every subsequent message that is split…Read more

Specifically, I am looking to take a message with a base64 encoded PDF and write the PDF file out to a directory using the decode function.

I jumped over to try the testing tool on the Master site, and it worked as expected (since the proc is local, there). Running the testing tool on one of the non-master sites produces the error. I tried cycling the…Read more

Command Issued: hcitpstest -r run -x ASCII -f len10 -c sms_ib_data /qvdxdev/qdx6.0/cis6.0/integrator/test01/adt_a01_sample.txt “filter_msgs_continue3 {SEGFLD {PV1-2 PV1-10}} {VLIST {{I E S} {CVE CVI CVR END HBC IRP IVT LTH…Read more

One more question: If a site has an HL7 variant or tcl proc with the same name, will it override the master site, or will the master site override it?

Steve Williams wrote:
John,

I currently FTP from the server to my PC, editing in Notepad++, and FTP it back to the server. Being able to access it via the Script Editor would cut out some steps.

As it turns out, I was missing a second set of brackets to specify that SMH MRN was a single list item, rather than two items in the same list.

For example, I…Read more

My question is if I can add receiving systems to the wildcard…Read more

bill bearden wrote:
John,

Try this slight modification to Charlie’s code. lsearch with the -all switch will return a list of indexes when it finds multiple matches. You probably need to iterate through the result of the lsearch, just in case it returned a list and not a single value.

set rmList {}
# Loop through each GT1. [code]set rmList {}
#…Read more

set seglist2

Read more

As for the issue I’m having with A02/A03 and my custom segment, it is being translated into a FRL. The FRL is the same for all message types, but it appears that the inbound message is not mapping correctly to the…Read more

Charlie Bursell wrote:
It will work as long as the segments in all messages are squentially the same.

Max Drown wrote:
From the patch notes for 6.0.1

In previous versions, when a user wanted the engine to not truncate any field content, the field length would be set to unlimited (-1). However, this could introduce an issue where not all fields would be set to unlimited inside the engine.
A new option has been added that forces the engine not to…Read more

I am having what I feel is a similar issue. We upgraded to CL 6, and one of our outbound FTP interfaces has started adding an extra linefeed character at the end of the file.

This was a raw route with only a directory parse on the inbound and an outbound TPS to append a timestamp to the file name. Otherwise, my settings are similar to…Read more

Steve Carter wrote:
John,

The ‘no match-no more phrases to try’ error means that the mllp encapsulation is incorrect.

In this case, the message is missing the final x0d

[pdl :PDL :DBUG/0: t_optiflex_a:07/26/2013 08:50:28]

Given that this worked fine before the upgrade, I have told the vendor that it must be something on their side. I am just trying to get it tracked down and fixed as quickly as possible.

If you open a command line and type ‘telnet ###’ where ### is the IP address of your Cloverleaf server, you should be able to log into the backend and run your commands.

Go into Control Panel and choose Programs and Features.
On the left, there is an option to Turn Windows features on or off.
Check the box that says ‘Telnet Client’.

That should allow you to run Telnet.

Edit: Just noticed that you indicated that Telnet services are turned on. Have you…Read more

I’d hate to find out that one of these lock files is created when the site comes up and is required for security…

I’ll just have to keep doing this workaround until we upgrade, I suppose. I’ve…Read more

We have an FTP job that runs each night, and has done so fine for the last year (as long as I’ve been in this position). Last night, however, the audit and error logs exploded to over 550MB a piece, filled with the following error:

[fset:read:ERR /0:    f_impac_c:05/06/2013 20:15:05]…Read more

The ones that are currently in the database are dated from 4/23-4/25, and I believe that I did resend quite a few ADTs on that date, which Jerry had…Read more

Last night, I remembered that the previous interface specialist mentioned that there needs to be a dummy file in the directory, though he never mentioned why. I suppose that this would be it.

Would the directory parse tcl produce the behavior that I was experiencing, if there is nothing in the directory?

In the interest…Read more

Remarkably, this seems to have worked! Might I ask why this would be necessary when connecting to our Production domain, but not in our Development domain? I do not know what the -a flag does.

Thanks for your help!

We are actually running 5.5 Rev 1, which is slightly less out of date. I have engaged Infor, and I am speaking with our technical team to coordinate an AIX upgrade, as well.

Thanks for all of your help!

Thanks so much for the information, guys. It helped to confirm some of our suspicions!

[icl :tcpi:ERR /0:    cdi_xlate:04/16/2013 10:52:42] Read on socket 32 failed: Connection reset by peer
[cmd :cmd :INFO/0:      cdi_cmd:04/16/2013 10:52:47] Receiving a command
PANIC: “str != ((char *)…Read more

I had never used the -c flag before. Big hat tip for the recommendation!

That being…Read more

It is very intermittent. We will process over 1,000 ADTs a day, and many days we have no failures.

However, on occasion, there will be a message that…Read more

The foreign system is creating these segments, so is it possible for CL 5.5 to interpret segment names that are longer than 3 characters?

Thanks again for the swift response. I am speaking of the pre and post proc sections within the Table action. In the bottom frame, where you specify input and output fields, the middle tcl section has pre and post tabs.

My assumption is that the pre proc tab is for transformations to happen to the input before it gets checked by the table,…Read more

Might be worth a shot, if the compatibility modes do not work.