[jigar mehta]

Bevan,

I think Jim is pointing in right direction earlier, we have issue with firewall/ VPN few years back (it was not cloverleaf related at all)

Let me ask you question.

Does data flow  stopped  (for not having any data to transfer or no more transaction from sending system) for period of time between cloverleaf and core point at any point preceding to issue?

We upgrade (& migrated to) our HIS system to HPUX and O/s stop sending Keep alive/ hearbeat signal when there is no traffic, so firewall was shutting down tunnel after 30 minutes and both client/ sender and receiver/llstener were up and no aware of firewall closing, so when next time data comes in, it will fail on sending end as firewall is closed and can not reach destination.

you might have totally different issue, but i just want to share our experiences.

Thank you,

Jigar

Bevan Richards wrote:

I stopped the thread and did the hcitcptest. If I try it with the thread on, I get a socket error.

I have an alert that fires when there are more than 9 messages waiting to go out. I did the test as soon as I was notified of the alert.

I have started (this morning) saving the ACK’s they send to see if there is a correlation between waiting for an ACK and the messages stopping.

I really appreciate all the time and help you have given me on this.

[jigar mehta]

Hello Jim,

We are trying to map multiple/ repetitive obx and NTE to OBX, it seems count for obx works and maps as usual, but when I try iterate nte to map obx, instead of create new obx, it overwrite on existing obx.

I am sure i am missing either basis or variable or loop, but if u can help me point in right direction, i would appreciate

Jigar

Jigar B Mehta

Interface Consultant

CHOC Tower II

jmehta@CHOC.ORG

(714)532-7633 Office

(224)245-4353 Cell

[jigar mehta]

Jason Bond wrote:

Can Cloverleaf version 5.7 handle 834 file formats, if so, how?

[jigar mehta]

We have at sherman ADT_A([0-4][1-8]) for each all ADT trigger starting from A01 to A48 (some of the event our HIS/ Cerner system doesn’t output trigger but it seems we have all inclusive  8) )

Thanks,

Jigar

Mike Brown wrote:

I do not know if you still need help with this but i think you might need a parenthesis around the route for it to work, i think it will work with or without, but here is what we have it set up as here with the wildcard button checked..

for ours

ADT_A(0[12348]|1[13678]|2[349]|3[06]|4[4])

for yours

ADT_A(0[148])

[Author]

Replies