Current status:

Syndromic data passing to state endpoint via outbound java/ws-rawclient thread. Two conduits defined on thread – 1) to state hl7 api svc  & 2) to state api token service

Two RawConsumers defined on thread:   1) POST_API  & 2) TOKEN_REQ

Thread outbound tab, pre-write Pro…Read more

Having an issue connecting an outbound thread from Cloverleaf to an AWS cluster

We’re running Cloverleaf v19.1.2 on Infor’s cloud

Downstream vendor has two physical nodes hosted in AWS cloud, each on a different subnet [AWS stating this is the proper way to do the clustering].

We can connect to the AWS cluster IP and connect when vendor…Read more

I’m able to send the GET request to the TOKEN endpoint,   pull the token out of the https reply and evaluate token expiration time but stuck at this point.

Need to put the token in the header for subsequent POST request.

Not sure how to: 1) put the token I’ve isolated into the  header ;   2) generate the POST msg once the token has been…Read more

“So, to get the token in your ib reply, you would first get the USERDATA keyed list, then get the httpResponseHeaders keyed list…Read more

REST API using java/ws-rawclient outbound.

Need to send GET request to retrieve oauth2 token, then plug that token into https header {Bearer token} on outbound POST msg with HL7 payload.  Token can also expire so I need to evaluate token from response and re-issue token request if expired.

Have the GET working, see the encrypted token in…Read more

Had to set the webClientFactoryKey

keylset uData webClientFactory $webClientFactoryName
msgmetaset $mh USERDATA $uData

Have two Raw_Consumers on outbound java/ws-rawclient protocol config.

One pointing to update url; other pointing to discharge url

webClientFactory key passes name of Raw_Consumer , based on logic in…Read more

1 – for updates, 2 – for discharges

Sent webClientFactory name in USERDATA

msgUserData       : {webClientFactory AngelEyeUpdateLGH} {httpRequestInfo {requestURL https://lowellgeneral-test.angeleyecameras.com/api/v1/adt/update}}

Got below error…Read more

Does anyone know the syntax for passing webClientFactory NAME(s) for a java/ws-rawclient outbound thread?

I’m not sure if these are passed in the USERDATA as an override or if it’s a…Read more

Took the “catch” statements out, got more detail on error in log:

[java:java:WARN/1:_JavaRaw_0:05/16/2022 13:49:09] com.infor.cloverleaf.gjdws.validation.MessageValidation printWarnings:WARNING: Message validation has detected 1 warning
[java:java:WARN/1:_JavaRaw_0:05/16/2022 13:49:09]…Read more

Running into the same issue

Would it be possible to share the tpsFhirSetServerUrl  proc?

Was this on your Cloverleaf server(s) or did Infor have to provide it?

We’re on v19.1

Thanks

I was monitoring that thread, implemented some code but getting the BADDATA error

1st tclproc on route – formats data to JSON format,  sets USERData to value that will be appended to url

2nd tclproc – on tps Outbound tab of WS-JavaRaw Client thread;  pulls USERData, sets url with appended value, resets UserData

Looks to be setting this c…Read more

Got this working, worked through some auth then payload issues w vendor.

Now I need to figure out how to make the url dynamic – update vs discharge based on specific HL7 functions

example:

https://test.com/api/v1/adt/update     v…Read more

Tclproc code:

catch [set newMsg $JSONmsg]]
msgset $mh $newMsg

#### —————————————————————
keylget args MSGID mh
keylget args CONTEXT context

echo “message id: $mh”
set INmsg [msgget $mh]

echo “message body: $INmsg”
echo nn$context Dump:

msgdump $mh
ech…Read more

Trying to execute a PUT request via REST API to a vendor.   ADT translated from HL7 to JSON via tclproc.   Outbound thread setup to be java/ws-rawclient (config in attachment)

———————————————————————-

Message sent: (Test – no PHI)

[pd :thrd:DBUG/3:xxxxxx_JavaRaw:–/–/—- –:–:–] message : ‘…Read more

We use the java/ws-rawclient to send/recv  query (QBP) and response (RSP) immunization data to the Massachusetts Dept of Public Health MIIS registry.

on the thread, in the raw-consumer we had to add some values to the header override

Outbound tab of thread:  TPS Outbound Data:  custom tcl to build soap env…Read more

I’ve tried multiple variations of those encoding characters; still no luck

Internal brainstorming session in 20 min; maybe will have update after that

Thanks again

Can’t makeout the replacement characters:

CR should be replaced by

NL should be replaced by

Not familiar with XML encoding within the tclproc.

Any suggestions on how I could accomplish this?

Thanks

Bill

I think the current problem is the CDATA section is treating the carriage-return or linefeed characters as text
If I manually remove them [and hit ENTER key] in the SoapUI utility the message transmits successfully

Example- current…Read more

Use same outbound pre-write tclproc to embed hl7 in soap envelope

Get error finding the destination url when attempting this method

Extract from Cloverleaf logfile:

[cmd :cmd :INFO/0: billtest_cmd:10/30/2020 16:49:57] Receiving a command
[cmd :cmd :INFO/0: billtest_cmd:10/30/2020 16:49:57]…Read more

For the java-ws client thread – I put a tclproc on the pre-write outbound tab.

Embeds the transaction in a soap envelope but looks like the org.apache.cxf is still overriding/creating a soap envelope

Extract from logfile:

[pd  :pdtd:INFO/3:       soap_1:–/–/—- –:–:–]     message           : ‘<soap:Envelope xmlns:soap=”http://w…Read more

I’m configuring a java-ws client in Cloverleaf 19.1.1 to transmit immunization query records (QBP) to our State Immunization Registry (Massachusetts MDPH MIIS).

The registry will return an RSP response if immunization history found for specific patient.

I have the java-ws client setup referencing the WSDL that MDPH sent me. The thread…Read more

We split the output files from the tmp input file based upon record max counts.

Kept the same UPoC and Advanced Scheduler setup

Cron calls ftp script to send output files to server that stores java tunneling utility to State DPH.

Powershell…Read more

Current tclproc, that successfully processes one nightly file, below:

#    *********************************************************************
#    on RUN mode:    Appends msgs to temp file TUFTS_MDPH_ELR_tmp_in.txt
#
#                    Make sure to set Process name to “softlab” for TEST/PROD
#
#    on TIMER mode:  Writes header, re…Read more

Since increase Covid reporting requirements – we’re having issues with our ELR results file to state DPH exceeding DPH max file size limit.

We process using upoc protocol and advanced scheduler on outbound thread.

HL7 msgs from lab stored in tmp file; upoc reads temp file and writes output on timer.

Header/trailer added to output file

I…Read more

Just a follow up;  this is working fine

Steps:
1)  created location for packages off master site
    /hci/cis6.1/integrator/master_t/tclprocs/packages

2)  Wrote script for namespace code; script to be used as the package
    Code referenced in 8/24/17 12:07 post  (DoctorNPIlookup.tcl)

3)   ran hcitcl>pkg_MkIndex command to create pkIndex…Read more

Ran the following:
From /hci/cis6.1/integrator/master_t/tclprocs/packages

hcitcl>pkg_mkIndex

Trying to set this up with the tcl/namespace in a pkg

Created tcl file with namespace code in file

entered package provide  and namespace eval statements to beginning of script

Created a packages directory in our master_t site under the tclprocs directory
(/hci/cis6.1/integrator/master_t/tclprocs/packages)

When I go to run the mkpkgindex…Read more

Are there any ‘gotchas’ or specifics that need to be setup in the tcl/namespace in the master site?

Also- any specific syntax for calling from the individual sites?

Examples would be helpful if you have any.

Also – we just set some tables up in our master site.  They can be called/reference from the individual sites.  We’ve tested that…Read more

We got this working, using some of Charlie Bursell’s code from another post on using the “lsearch” command and looping through segments,etc.

Used Charlie’s code as a baseline then modified as needed.
Thanks Charlie!

Attached is tcl script.
Script takes Optum HL7 BAR transactions and creates Invision 49 (Credit) and 48 (Charge) transactions.…Read more

Got this working.
Turns out we needed to write the file to a virtual share.
We set up a share on one of our ftp servers and set the outbound thread to file-ftp.

Inbound thread has a tclproc on the route which sets the metadata USERDATA keyedlist.

Outbound thread has a prewrite-PROC on the outbound tab to grab the USERDATA elements, set the…Read more