Xlate creating segments

[Jack Plumb]

Let me say in advance I’m very new to Cloverleaf. I seem to have an issue where segments (NK1, AL1, and DG1) are getting created after it goes through my xlate and an “M” is getting defaulted in the 1st fields. Below is the inbound transaction and the second is after the xlate.

Anybody help me with this?

MSH|^~&|MCK|050|MCK|050|20070419153455||ADT^A04|00190|P|2.2|||AL|NE

EVN|A04|20070419153446

PID|0001||004171905||GENLAB^TESTER||19050417|M||C|SOME STREET^^SOME CITY^SC^29601^USA^^023|023||||M||4731009^^^||||||||||||N

ZPL|||SOME STREET^^SOME CITY^SC^29601^USA||UNEMPLOYED

PV1|0001|I|WW||||11741^ABSHER, JOHN R.|||WWW||||P||||W||C||||||||||||||||||||||||200704191533||0000000.00|0000000.00|0000000.00|0000000.00

ZPV

ZDI|05423

ZLA|EG

ZA1|N1|N2

PV2||||||||||||||||||||||N

GT1|0001|0737624|GENLAB^TESTER||SOME STREET^^SOME CITY^SC^29601^USA^^023|||19050417|M||PT|||||UNEMPLOYED|^^^^^USA

ACC

MSH|^~&|MCK|050|MCK|050|20070419153455||ADT^A04|00190|P|2.3|||AL|NE

EVN|A04|20070419153446

PID|0001||004171905^^^^MR||GENLAB^TESTER||19050417|M||C|SOME STREET^^SOME CITY^SC^29601^USA^^023|023||||M||4731009||||||||||||N

NK1|M

PV1|0001|I|WW||||11741^ABSHER, JOHN R.|||WWW||||P||||W||C||||||||||||||||||||||||200704191533||0000000.00|0000000.00|0000000.00|0000000.00

AL1|M

DG1|M

Thanks,

Jack

Topic

[Jim Kosloskey]

Jack,

Welcome to Cloverleaf(R) and Clovertech.

Are the segments in question defined as required in your outbound variant?

Are you using BULKCOPY in your Xlate?

What release of Cloverleaf(R) and what OS?

Jim Kosloskey

email: jim.kosloskey@jim-kosloskey.com 29+ years Cloverleaf, 59 years IT - old fart.

[Jack Plumb]

Jim,

Ver 5.3

Unix

Not using bulkcopy

I checked the outbound variant an no fields are

set to be required an in the xlate the NK1, AL1, and

DG1  fields are set to optional. But there are other

segments that are NOT beging generated and are

part of the msg (A08). I did not change any values

from the standard A08 from the library.

I have found out that this seems to be a global issue not

just with my site.

Jack

[Author]

Replies