UPoC Thread Routing Issue

[Todd Hamilton]

I would like to create a single process with three Threads.

Thread A. Protocol: tcpip server. Receives HL7 message from external system. Static raw route message to Thread B

Thread B. Protocol: UPoC. Perform complex transformation of message using TCL code. Static raw route message to Thread C

Thread C. Protocol: tcpip Client. Sends HL7 message to external system

I can’t get the above to work the way I want. I think the issue is with Thread #2.

When I create a create a single process with only TWO Threads.

Thread A. Protocol: tcpip server. Receives HL7 message from external system A. Static raw route message to Thread C

Thread C. Protocol: tcpip Client. Sends HL7 message to external system

It works.

Can you provide insight on areas I can look at in order to troubleshoot?

todd.hamilton.omaha@gmail.com
(402) 660-2787

Topic

[Todd Hamilton]

When I turned on EO enable_all, the log file produces an ever growing list of repeating lines (below)

When Checking msg [0.0.2], owner ‘EpicAdtFltr’, state 11

[dbi :log :INFO/3: a_xlate:06/06/2014 11:51:42] Message not selected

The file is ever growing with the above lines. That may be my problem. What do the two lines above mean?

todd.hamilton.omaha@gmail.com
(402) 660-2787

[James Cobane]

Todd,

Just curious as to why you want to route to thread B and not directly to C? With all three threads in the same process, you’re not shifting any of the processing as all the work will be done in the same process.  You could simply perform the tcl transformation in a pre-route proc to thread C.  

Jim Cobane

Henry Ford Health

[Todd Hamilton]

Good point.  What I am really looking for is a successful example of a thread that gets messages routed to it using Message Routing; processes the message using a TPS; and routes the message to another thread using Message routing.  

I am new to Cloverleaf and working on some initial/foundation approaches to out architecture.  I seem to be missing something in the middle thread.  I think it has something to do with my misuse of disposition (CONTINUE/OVER) and or misplacement of the TPS.

todd.hamilton.omaha@gmail.com
(402) 660-2787

[Todd Hamilton]

This issue is resolved.  My problem was that I was not using correct code for the OVER on the TPS.

todd.hamilton.omaha@gmail.com
(402) 660-2787

[Author]

Replies