Clovertech

RHEL 8 / CLOVERLEAF 20 FIREWALL

› Clovertech Forums › Cloverleaf › RHEL 8 / CLOVERLEAF 20 FIREWALL

  • Creator
    Topic
  • February 2, 2021 at 12:50 am #118458
    Stewart
    Participant

      Currently receiving a connection error from the client if the firewall is turned on in RHEL.  When it’s off, the client connects w/out issue.  Any suggestions on what needs to be added to the firewall to allow the connection?  I’ve attempted adding the port (13024) to the public and trusted zones but still no luck.

    • Creator
      Topic
    Viewing 0 reply threads
    • Author
      Replies
      • February 2, 2021 at 7:16 pm #118462
        Jared Parish
        Participant

          Hi Stewart. I enabled the firewall on our RHEL last year and it is working without issue.  It sounds like you might have not have cloverleaf configured to work behind a firewall.  If you haven’t already, read the ‘Firewall’ section in the Cloverleaf Documentation.

          Also, I believe you’ll have to configure an ephemeral port range in site settings — also in the cloverleaf documentation.  Community, correct me if I’m wrong.

          Let us know if you’ve already configured these settings.

          • This reply was modified 3 years, 10 months ago by Jared Parish.

          - Jared Parish

      • Author
        Replies
      Viewing 0 reply threads
      • You must be logged in to reply to this topic.