R/S6000, AIX5.2
Quovadx Platform V v 5.3P_rev2
This is my first attempt at sending XLM via http-client protocol. Our normal standard is HL7 using a VPN, for vendors outside our network. When I start the thread it goes to error and the message below is in the process log. Does this error mean we need to purchase an additional license from Quovadx to make this work, or have I set something up wrong?
I setup the netconfig as follows –
Protocol – PROTOCOL:http-client
properties –
URL -vendor supplied URL
Method – POST
HEADER – BLANK
https CHECKED
configure
MODE -none
Non-Secure mode. All security disabled. (I selected this option for initial testing purposes)
[http:init:ERR /0:cob_o_ad_http] No Query TPS configured — HTTP Client driver will do nothing without it.
03/31/2006 12:31:04
[http:init:WARN/0:cob_o_ad_http] SSL is not licensed — ignoring SSL configuration parameters.
[pd :pdtd:INFO/1:cob_o_ad_http] Set driver status to PD_STATUS_ERROR
03/31/2006 12:31:04
[pd :pdtd:ERR /0:cob_o_ad_http] PD initialization FAILED!
[pd :pdtd:INFO/1:cob_o_ad_http] Set driver status to PD_STATUS_ERROR