HRL used in xlate – newbie

[Bob Schmid]

HRL

segment1

segment2

After copying inboudn fields to segment1..I do a CONTINUE (pas segment1)…..how do I prevent segment1 from being passed again after I build segment2 and send?…do i have to space out segment1?

Topic

[Jim Kosloskey]

Robert,

In your intended message is the segment 1 supposed to be optional or is there supposed to always be a segment 1 and segment 2 with each message?

email: jim.kosloskey@jim-kosloskey.com 30+ years Cloverleaf, 60 years IT – old fart.

[Bob Schmid]

We are getting this on outbound after xlate:

Hexdump of file: ntt_Epic_Willow_Charges.dat

00000000   34383030 30303032 30333132 36313130   4800000203126110

00000010   37313731 32303030 30333935 31202030   7171200003951  0

00000020   30303031 20202020 20202020 20202020   0001

00000030   20202020 20202020 20202020 20202020

00000040   20202020 20202020 20202020 20202020

00000050   34383030 30303032 30333132 36313220   480000020312612

00000060   444f5841 5a4f5349 4e204d45 53594c41   DOXAZOSIN MESYLA

00000070   54452034 204d4720 504f2054 41422020   TE 4 MG PO TAB

00000080   20202020 20202020 20202020 20202020

00000090   20202020 20202020 20202020 20202020

000000a0   0a                                    .

here is the HRL:

(attached)

[Bob Schmid]

Continue was not used in the xlate.

we want segment1 x0a terminated and segment 2 x0a terminated

[Jim Kosloskey]

Robert,

Inyour VRL definitions in the Global Proprties, set your termination character to what you want.

email: jim.kosloskey@jim-kosloskey.com 30+ years Cloverleaf, 60 years IT – old fart.

[Joe Ferrare]

Jim,

I’m new to Cloverleaf and Bob had posted this for me. What I did was create an HRL. Within the HRL, I created 2 FRL’s. FRL1 is Record Type1, and FR2 is record Type2.

I always want to write out Record Type1 and Record Type 2 in the following manner for each input record:

Record Type1

Record Type2

What’s coming out is the following:

Record Type1                  Record Type2

What can I do to ensure each record type is written to a separate line?

Thanks,

Joe

[Jim Kosloskey]

Joe,

In your FRL definitions add a last field.

You could set a default of hex 0a or 0d (depending on what you want) in the FRL definition or use a COPY of hex 0a or hex 0d to the FRLs in the Xlate.

email: jim.kosloskey@jim-kosloskey.com 30+ years Cloverleaf, 60 years IT – old fart.

[Joe Ferrare]

Jim,

I was just going to update this. That’s exactly what I did. I added a field a did a copy hex 0a and it’s doing what I want. Thank you for responding.

Joe

[Author]

Replies