Cloverleaf 6.0: Xlate IF Action issue persists

[Jim Kosloskey]

All,

In Cloverleaf 5.x (at least through 5.6) sometimes when editing a Xlate IF Action the changes showing in the Configurtor are not being saved.

Thus testing (which reloads the Xlate) does not reflect the change which can be seen in the Configurator.

When one closes the Xlate Configurator for that Xlate then opens it again, the changes in question are gone.

This problem is still there in Cloverleaf 6.0.

So if you happen to be testing changes to an IF Action and the changes don’t seem to be working in Cloverleaf 6.0 it is still worthwhile to close the Xlate then open it again – and make your changes again.

email: jim.kosloskey@jim-kosloskey.com 30+ years Cloverleaf, 60 years IT – old fart.

Topic