Cloverleaf 6.0 testing issue

[Mike Keys]

I have an issue and hope someone can point me in the right direction.

I loaded 6.0 server via a RedHat VM on my latop and loaded the client FAT on same desktop. I have connectivity with the server and cna bring up the IDE just fine. I ran a site init to create a location for one of our test sites and just copied over all relevant folders. I can see all the threads in the site, their configs and control them just fine.

The problem is that I have tried sending a sample message across a couple of different ways but 6.0 is not responding to it. I tried using a feeder thread from our current test site to the 6.0 site and again using the TCPIP test tool.

When I look in the watch log, I see the following everytime I try to send a message:

[pdl :PDL :WARN/0:       conn_1:03/22/2013 12:08:44] match phrase basic-msg rejected

[pdl :PDL :ERR /0:       conn_1:03/22/2013 12:08:44] no-match: no more phrases to try

I have no idea what this means, other than Cloverleaf received something and is trying to match on something and couldn’t so it rejected the message.

Topic

[Jim Kosloskey]

Mike,

That usually means the sending system is not using the proper mlp encapsulation for the message.

Are both the sending and receiving connections set up as mlp/pdl?

Also turn up the eo config an you will see a hex dump of the offending message(s). With that you can determine if the proper encapsulation is in place.

email: jim.kosloskey@jim-kosloskey.com 30+ years Cloverleaf, 60 years IT – old fart.

[Mike Keys]

Well, glad it’s Friday. I had my thread setup as tcpip protocol instead of pdl-tcpip.

Brain fart.

Problem solved. +10 points to you!

[Author]

Replies