Clovertech

Adding Facility ID to MSH4

› Clovertech Forums › Read Only Archives › Cloverleaf › Tcl Library › Adding Facility ID to MSH4

  • Creator
    Topic
  • February 9, 2010 at 6:10 pm #51564
    Sebastien Bazile
    Participant

      There’s anyone out there have a proc that can help me add my Facility ID to MSH4. I’m really new at this so I really need the help.  

      thanks in advance.

    • Creator
      Topic
    Viewing 7 reply threads
    • Author
      Replies
      • February 9, 2010 at 6:57 pm #70786
        Jim Kosloskey
        Participant

          Sebastien,

          Ar you using an Xlate?

          I will assume so and that you want the outbound MSH-4 to contain some literal like ‘My Facility’.

          Just use a COPY Action in the Xlate and for the Source column put =My Facility    for the Destination Column just select MSH-4 from the Outbound Message tree.

          email: jim.kosloskey@jim-kosloskey.com 29+ years Cloverleaf, 59 years IT - old fart.

        • February 11, 2010 at 6:15 pm #70787
          Sebastien Bazile
          Participant

            I did and it worked, but I only get MSH segment and that’s it.  Nothing else.

          • February 12, 2010 at 7:29 pm #70788
            Shibu Mathew
            Participant

              Sebastien,

              You should do PATHCOPY for the remaining segments you want on your outbound message.

              Thanks.

            • February 16, 2010 at 9:39 am #70789
              Robert Kersemakers
              Participant

                Or start with a BULKCOPY to copy all the inbound fields to outbound. This will only work if your inbound and outbound variant are equal (or similar), which I guess is the case for you.

                If not, you should PATHCOPY all the segments as Shibu pointed out.

                Zuyderland Medisch Centrum; Heerlen/Sittard; The Netherlands

              • February 17, 2010 at 2:48 pm #70790
                gricelda lopez
                Participant

                  Hi Sebastian,

                  I am too in this same situation and am not familiar with path copy.

                  Where you able to solve the msh task?

                  I read your replies below saying to add a pathcopy for each segment, im not sure how to even start this but if you did get yours to work any help is appreciated.

                  Thanks!

                  Gricelda

                • February 18, 2010 at 6:48 pm #70791
                  Sebastien Bazile
                  Participant

                    I’ve tried everything so far I’m only getting part of the message. I’m very new to this and if someone can help me with a step by step on how to copy the entire mesage. I will appreciate that very much.

                    thank you

                  • February 18, 2010 at 6:59 pm #70792
                    Jim Kosloskey
                    Participant

                      Serbastien,

                      Email me and we will chat.

                      email: jim.kosloskey@jim-kosloskey.com 29+ years Cloverleaf, 59 years IT - old fart.

                    • February 23, 2010 at 5:29 pm #70793
                      Sebastien Bazile
                      Participant

                        I got it to work guys. Thank you everyone for helping out. Gricelda, do a BULKCOPY first, then COPY the message from the SOURCE to DESTINATION. If you’re still having problems, please email me at SBAZILE@INTERFAITHMEDICAL.COM

                        Again, thank you guys.

                    • Author
                      Replies
                    Viewing 7 reply threads
                    • The forum ‘Tcl Library’ is closed to new topics and replies.