Reply To: connect to process error

Homepage Clovertech Forums Read Only Archives Cloverleaf Cloverleaf connect to process error Reply To: connect to process error

#59506
Bob Richardson
Participant

    Greetings,

    We are running AIX 6.1 TL 7 Unix of course.

    The Cloverleaf software uses the ephemeral port range

    as defined by your system admin:  default is 32K to 64K.

    Avoid using these ports for any interfaces developed in Cloverleaf.

    Hcicmd uses this range to get its port for communication with process

    threads.  Cloverleaf multi-connect server threads (interfaces)

    also use the ephmeral range.

    Also: as a rule we avoid ranges below 8K as some system services

    use these ports for various utilities and services.  Check your /etc/services file if you are curious.

    We are running the 5.8.5.0 Integrator and plan to apply Revision 6

    which fixes some issues with hcicmd and server port problems.

    Hope this helps to narrow down your problem.