Clovertech

Error 12 – Not enough space in Error Log

› Clovertech Forums › Read Only Archives › Cloverleaf › Cloverleaf › Error 12 – Not enough space in Error Log

  • Creator
    Topic
  • March 22, 2006 at 5:34 pm #48419
    Andre van Olden
    Participant

      I noticed the following “SPACE” error that is showing up on one of my threads:

      Engine idle — 03/13/2006 06:38:43

      03/13/2006 08:47:18

      [pdl :PDL :ERR /0:sw67quest_out] read failed: Connection timed out

      03/13/2006 08:47:18

      [pdl :PDL :ERR /0:sw67quest_out] read returned error 12 (Not enough space)

      03/13/2006 08:47:18

      [pdl :PDL :ERR /0:sw67quest_out] PDL signaled exception: code 1, msg device error (remote side probably shut down)

      Engine idle — 03/13/2006 08:47:48

      There has been no traffic on this thread, so was really interested in an explanation of this error and any solutions to prevent this from occurring.

    • Creator
      Topic
    Viewing 5 reply threads
    • Author
      Replies
      • March 4, 2008 at 5:06 pm #58582
        Michael Davis
        Participant

          I received this same error today.

          Does anyone have any info on this?

          does ‘error 12 (Not enough space)’ refer to space on the engine or on the application we are attempting to send to?

        • March 4, 2008 at 5:41 pm #58583
          Jim Kosloskey
          Participant

            Based on the information provided, I would say it is the receiving system that has the issue.

            However, I would suggest turning up the engine ‘noise’ level and when the problem recurs, check the log for additional information to see if that clarifies matters.

            Jim Kosloskey

            email: jim.kosloskey@jim-kosloskey.com 29+ years Cloverleaf, 59 years IT - old fart.

          • March 4, 2008 at 6:35 pm #58584
            Michael Davis
            Participant

              Thank you!  That was my assessment as well, but I was surprised to see such a detailed error message from what I am guessing is the NAK.

            • March 4, 2008 at 6:47 pm #58585
              Jim Kosloskey
              Participant

                Michael,

                I don’t think that is a NAK (That would be a message actually returned not a PDL error).

                My best guess is the receiving system is out of memory.

                Again with the ‘noise’ level turned up, more intelligence can be garnered.

                Jim Kosloskey

                email: jim.kosloskey@jim-kosloskey.com 29+ years Cloverleaf, 59 years IT - old fart.

              • March 5, 2008 at 12:55 pm #58586
                Tim Wanner
                Participant

                  This was recommended by support:

                  Hi Tim, make a copy of the mlp_tcp.pdl, modify the mlp_tcp.pdl like the following below, and then compile the pdl:

                  …

                  hci_pd_msg_style basic phrase:basic-msg

                  field:data

                                                           timeout:60000

                  resync:\xb

                • January 4, 2010 at 11:48 pm #58587
                  james tey
                  Participant

                    Tim Wanner wrote:

                    This was recommended by support:

                    Hi Tim, make a copy of the mlp_tcp.pdl, modify the mlp_tcp.pdl like the following below, and then compile the pdl:

                    …

                    hci_pd_msg_style basic phrase:basic-msg

                    field:data

                • Author
                  Replies
                Viewing 5 reply threads
                • The forum ‘Cloverleaf’ is closed to new topics and replies.